Car Paint Correction in St. George, UT
It's In The Details
Erase Swirls, Scratches, and Defects for a Mirror-Like Finish
Have you ever looked at your car under direct sunlight or a gas station light and noticed a web of fine scratches, "holograms," or a dull, hazy finish? These are defects in your clear coat, usually caused by automatic car washes and improper drying techniques. No amount of wax will fix them—they need to be safely removed.
Paint Correction (also known as buffing or polishing) is the art of leveling the clear coat to permanently remove these imperfections, revealing the deep, glossy color underneath.
The Transformation Process
This is not a quick "buff and wax." It is a meticulous, multi-step process that requires patience and precision.
- Decontamination Prep: Before we polish, the paint must be surgically clean. We strip old waxes and use clay bars to remove embedded grit that a normal wash misses.
- Paint Analysis: We measure your paint depth and inspect the condition of the clear coat to determine the safest and most effective combination of pads and compounds.
- The "Cut" (Defect Removal): Using machine polishers, we gently level the clear coat to abrasion-free flatness. This removes swirl marks, water spots, etching, and light-to-medium scratches.
- The "Finish" (Jeweling): We follow up with a fine polish and a soft pad to refine the surface, maximizing clarity and creating a deep, wet gloss that looks like a mirror.
- Oil Removal: We wipe the vehicle down with an isopropyl alcohol solution to ensure no polishing oils are hiding defects. What you see is the true finish.
- Note on Scratches: We operate by the rule of "preservation." If a scratch is deep enough that your fingernail catches in it, it may be too deep to safely remove completely. We will improve it as much as possible without compromising the integrity of your paint.
Choose Your Level of Perfection
- 1-Step correction: A 1-step correction is perfect for you if your car has light scratches and swirls that you want to get rid of. Typically a 1 step involves prepping the paint with a decontamination and clay bar phase and then using a compound and a pad on a polishing machine to remove minor defects. For the majority of cases about 50% of defects can be removed through a 1 step process.
- 2-Step correction: This is our most common paint correction package. If your car has moderate-severe paint defects this buff and polish combo will help to improve your paints clarity up to 70%+. Your car will be prepped in full including decontamination and clay bar to remove contaminants and then a buff and polish process will remove the vast majority of swirls and markings.
- 3-Step Correction: A 3-step correction is for vehicles that are beyond moderate imperfections and need some more serious work. A 3 step correction process is aimed at vehicles looking to remove 85%+ of imperfections. It includes a full prep, decontamination, and clay phase followed by either wet sanding or 2 separate buffing passes, finished off with a polish. These jobs vary in cost and time vehicle to vehicle. If the vehicle needs more than 3 steps to obtain the desired clarity a unique step by step process can be made to ensure your vehicle gets the exact care it needs.
Why Invest in Paint Correction?
- Permanent Results: Unlike "glazes" that fill scratches temporarily, we remove them for good.
- Better Than Factory: Many cars leave the dealership with sanding marks and haze. We make it look better than the day you bought it.
- Pre-Ceramic Necessity: If you plan on getting a Ceramic Coating, correction is crucial. You never want to lock in scratches under a semi-permanent coating.
Read more reviews on
©2026, It's In The Details | SEO and Web Design by Ovalmint.